Download SIMetrix
Transcript
User’s Manual Parameters The parameters required vary according to the mode as follows: Mode Parameters Device Device name (e.g. V1) Parameter Parameter name Model Parameter Model name Model parameter name Temperature None Frequency (not DC or transient) None Monte Carlo None Example 1 Refer to circuit on page 188. In the previous example we swept the tail current to find the optimum value to minimise noise for a 1K source resistance. Here we extend the example further so that the run is repeated for a range of source resistances. The source resistance is varied by performing a parameter step on sourceR. Here is what the dialog settings are for the multi-step run: This does a decade sweep varying sourceR from 1K to 100k with 2 steps per decade. This is the result we get: 198