Download SIMetrix

Transcript
User’s Manual
Parameters
The parameters required vary according to the mode as follows:
Mode
Parameters
Device
Device name (e.g. V1)
Parameter
Parameter name
Model Parameter
Model name
Model parameter name
Temperature
None
Frequency (not DC or transient)
None
Monte Carlo
None
Example 1
Refer to circuit on page 188. In the previous example we swept the tail current to find
the optimum value to minimise noise for a 1K source resistance. Here we extend the
example further so that the run is repeated for a range of source resistances. The source
resistance is varied by performing a parameter step on sourceR. Here is what the dialog
settings are for the multi-step run:
This does a decade sweep varying sourceR from 1K to 100k with 2 steps per decade.
This is the result we get:
198