Download Section 3

Transcript
OMRON Product References
All OMRON products are capitalized in this manual.
Names of Devices and Tools
PT
Refers to OMRON NT series programmable terminals.
NTST
Refers to OMRON NT-series Support Tool.
PLC
Refers to an Allen Bradley SLC 500/PLC 5/MicroLogix series, GEFanuc 90-30 series, Siemens S7-300/400 series, Modicon TSX
Micro/Premium/Quantum programmable controller.
System installer Refers to an OMRON NT-series system installer.
PT Type
NT31/NT31C
(-V…)
Model
Attached to the
support tool (*1)
Applicable PLC
Personal Computer
For IBM PC/AT
Allen Bradley SLC 500 /PLC5
compatibles
/MicroLogix series
GE-Fanuc 90-30 series
Siemens S7-300/400 series
Modicon TSX
Micro/Premium/Quantum series.
For IBM PC/AT
NT631/NT631C
Attached to the
Allen Bradley SLC 500 /PLC
compatibles
(-V…)
support tool (*1)
5/MicroLogix series.
GE-Fanuc 90-30 series
Siemens S7-300/400 series
Modicon TSX
Micro/Premium/Quantum series
(*1) System program for NT31/NT31C and NT631/NT631C is attached to “NT-series Support Tool
for Windows (Ver. 4.2)”.
© OMRON, 1999
All right reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or
otherwise, without the prior written permission of OMRON.
No patent liability is assumed with respect to the use of the information contained herein. Moreover,
because OMRON is constantly striving to improve its high-quality products, the information contained
in this manual is subject to change without notice. Every precaution has been taken in the preparation
of this manual. Nevertheless, OMRON assumes no responsibility for errors or omissions. Neither is
any liability assumed for damages resulting from the use of the information contained in this
publication.
Trademarks
R
R
R
Microsoft , Windows and Windows NT are either registered trademarks or Trademarks of
Microsoft Corporation in the United States and/or other countries.
PLC names of SLC, SLC50/2, SLC50/3, SLC50/4, SLC50/5, and MicroLogix are registered
trademarks of Allen-Bradley Corporation.
PLC names of Series 90 is registered trademarks of GE Funuc Automation North America, Inc.
TM
TM
Siemens and S7 are trademarks of Siemens AG.
ii