Download Section 3
Transcript
OMRON Product References All OMRON products are capitalized in this manual. Names of Devices and Tools PT Refers to OMRON NT series programmable terminals. NTST Refers to OMRON NT-series Support Tool. PLC Refers to an Allen Bradley SLC 500/PLC 5/MicroLogix series, GEFanuc 90-30 series, Siemens S7-300/400 series, Modicon TSX Micro/Premium/Quantum programmable controller. System installer Refers to an OMRON NT-series system installer. PT Type NT31/NT31C (-V ) Model Attached to the support tool (*1) Applicable PLC Personal Computer For IBM PC/AT Allen Bradley SLC 500 /PLC5 compatibles /MicroLogix series GE-Fanuc 90-30 series Siemens S7-300/400 series Modicon TSX Micro/Premium/Quantum series. For IBM PC/AT NT631/NT631C Attached to the Allen Bradley SLC 500 /PLC compatibles (-V ) support tool (*1) 5/MicroLogix series. GE-Fanuc 90-30 series Siemens S7-300/400 series Modicon TSX Micro/Premium/Quantum series (*1) System program for NT31/NT31C and NT631/NT631C is attached to “NT-series Support Tool for Windows (Ver. 4.2)”. © OMRON, 1999 All right reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of OMRON. No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is constantly striving to improve its high-quality products, the information contained in this manual is subject to change without notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in this publication. Trademarks R R R Microsoft , Windows and Windows NT are either registered trademarks or Trademarks of Microsoft Corporation in the United States and/or other countries. PLC names of SLC, SLC50/2, SLC50/3, SLC50/4, SLC50/5, and MicroLogix are registered trademarks of Allen-Bradley Corporation. PLC names of Series 90 is registered trademarks of GE Funuc Automation North America, Inc. TM TM Siemens and S7 are trademarks of Siemens AG. ii