Download MULTITANK SYSTEM - Alpha Control Lab

Transcript
8.12 SAFETYMAX
Purpose:
Return the maximum allowed liquid level.
Synopsis:
SLF = get(TankObj, ‘SafetyMax’ );
Description:
When the level in a safety-active tank exceeds the maximum level, the
pump and the automatic valves are turned off. The control is set by the I/O
board to zero regardless of the control value sent out from the
MATLAB/Simulink environment. The system returns to the normal
operating mode if all levels in safety-active tanks go below the minimum
level.
This property returns five maximum levels.
See:
SafetyFlag, SafetyMin, SafetyAlert
8.13 SAFETYMIN
Purpose:
Return the minimum liquid level that deactivates the safety alert.
Synopsis:
SLF = get( TankObj, ‘SafetyMin’ );
Description:
When the safety alert
flag is activated the system returns to the normal operating mode if all levels
in safety-active tanks fall under the minimum level.
This property returns five
minimum levels.
See:
SafetyFlag, SafetyMax, SafetyAlert
8.14 SAFETYALERT
Purpose:
Return the safety alert flag.
Synopsis:
SLF = get( TankObj, ‘SafetyAlert’ );
Description:
When the level in a safety-active tank exceeds the maximum level the pump
and the automatic valves are turned off. Such conditions trigger the safety