Download Multiserver 3000

Transcript
Marathon 3K Voice/Fax Facility Manual
Configuration
Summary of Options
Tables 21 through 23 summarize the configuration options associated with
the voice/fax channel. Refer to pages 27 through 28 for option numbers of
each interface type.
Table 2-1. Voice/Fax Channel Characteristics Options
Option
Telephone
Interface
Default
Description
(Page Reference)
Mode
All
Voice/Fax
Selects two types of channel
signal processing: voice/fax,
and voice only (page 2-8).
Digitizing Rate
All
G.729
Selects one of ten voice
digitizing rates (page 2-9).
Input Level Gain
All
0 dB
Selects one of 26 input signal
gain values in 1-dB increments;
-6 is maximum attenuation; 0 =
no gain; 19 = maximum gain
(page 2-10).
Output Level
Attenuation
All
0 dB
Selects one of 26 output level
attenuation values in 1-dB
increments; 0 = no attenuation;
25 = maximum attenuation
(page 2-10).
Busyout Mode
All
System Controlled
Selects one of three methods of
busyout control (page 2-11).
Bandwidth
All
Voice Activated
Selects how the channel uses
link bandwidth: all the time, only
when voice or fax signals are
present, or dynamically (page
2-12).
Background
All
Regenerated
Selects to either regenerate or
suppress background noise
during idle periods. (page 2-13).
Priority
All
High
Selects either high or low
composite bandwidth priority for
the channel (page 2-13).
Signalling Format
E&M only
DC
Selects one of three types of
signaling format: DC, where
signaling is accomplished by the
state of the E and M leads;
2280, Tone, where signaling is
accomplished by tone over the
analog transmission path; and
pulsed DC, where signaling
follows Ron/Tron convention
(page 2-14).
Signalling Format
FXS only
Interrupted Ring
2/4
Selects one of two ringing
patterns (page 2-14).
2-3