Download Multiserver 3000
Transcript
Marathon 3K Voice/Fax Facility Manual Configuration Summary of Options Tables 21 through 23 summarize the configuration options associated with the voice/fax channel. Refer to pages 27 through 28 for option numbers of each interface type. Table 2-1. Voice/Fax Channel Characteristics Options Option Telephone Interface Default Description (Page Reference) Mode All Voice/Fax Selects two types of channel signal processing: voice/fax, and voice only (page 2-8). Digitizing Rate All G.729 Selects one of ten voice digitizing rates (page 2-9). Input Level Gain All 0 dB Selects one of 26 input signal gain values in 1-dB increments; -6 is maximum attenuation; 0 = no gain; 19 = maximum gain (page 2-10). Output Level Attenuation All 0 dB Selects one of 26 output level attenuation values in 1-dB increments; 0 = no attenuation; 25 = maximum attenuation (page 2-10). Busyout Mode All System Controlled Selects one of three methods of busyout control (page 2-11). Bandwidth All Voice Activated Selects how the channel uses link bandwidth: all the time, only when voice or fax signals are present, or dynamically (page 2-12). Background All Regenerated Selects to either regenerate or suppress background noise during idle periods. (page 2-13). Priority All High Selects either high or low composite bandwidth priority for the channel (page 2-13). Signalling Format E&M only DC Selects one of three types of signaling format: DC, where signaling is accomplished by the state of the E and M leads; 2280, Tone, where signaling is accomplished by tone over the analog transmission path; and pulsed DC, where signaling follows Ron/Tron convention (page 2-14). Signalling Format FXS only Interrupted Ring 2/4 Selects one of two ringing patterns (page 2-14). 2-3