Download Final Document

Transcript
increases, and boost mode the voltage is increased as the current decreases.
This way the power level will remain the same as it passes through the voltage
regulator. Some types of DC to DC converters that will be discussed in this
research paper are: Buck Converters, Boost Converters, Inverting Buck-Boost
Converter, and Non-inverting Buck-Boost Converter.
3.6.1 Buck Converter
The Buck converter or step down converter is a very popular switch mode
regulator. The Buck converter can operate in three different stages. The first
stage the switch is on and the diode is off. During this stage the inductor is
acquiring energy because the source voltage is greater than the output voltage.
This causes the current to rise in the inductor and the capacitor to charge. The
figure below illustrates this stage of the Buck converter and has the equations
which
dictate
the
behavior
of
the
circuit.
Figure 3.17: On-State of a Buck Converter with permission from Creative
Commons
During the second stage of the Buck converter the switch is off and the diode is
on. The current in the inductor freely flows through the diode and the energy in
the inductor is given to the RC network on the output. The current will become
zero and tends to reverse, however the diode will prevent conduction in the
opposite direction [29]. The inductor will also discharge in this state, a figure of
the second state and the equations that govern it can be seen below.
Figure 3.18: Off-State of a Buck Converter with permission from Creative
Commons
The third stage of the Buck converter the switch and the diode are both off. The
capacitor is discharging and the inductor is at rest with no energy in it. The
34