Download Final Document
Transcript
increases, and boost mode the voltage is increased as the current decreases. This way the power level will remain the same as it passes through the voltage regulator. Some types of DC to DC converters that will be discussed in this research paper are: Buck Converters, Boost Converters, Inverting Buck-Boost Converter, and Non-inverting Buck-Boost Converter. 3.6.1 Buck Converter The Buck converter or step down converter is a very popular switch mode regulator. The Buck converter can operate in three different stages. The first stage the switch is on and the diode is off. During this stage the inductor is acquiring energy because the source voltage is greater than the output voltage. This causes the current to rise in the inductor and the capacitor to charge. The figure below illustrates this stage of the Buck converter and has the equations which dictate the behavior of the circuit. Figure 3.17: On-State of a Buck Converter with permission from Creative Commons During the second stage of the Buck converter the switch is off and the diode is on. The current in the inductor freely flows through the diode and the energy in the inductor is given to the RC network on the output. The current will become zero and tends to reverse, however the diode will prevent conduction in the opposite direction [29]. The inductor will also discharge in this state, a figure of the second state and the equations that govern it can be seen below. Figure 3.18: Off-State of a Buck Converter with permission from Creative Commons The third stage of the Buck converter the switch and the diode are both off. The capacitor is discharging and the inductor is at rest with no energy in it. The 34