Download DAQ basics

Transcript
Glossary
DLL
Dynamic Link Library.
DMA
Direct Memory Access. A method by which you can transfer data to
computer memory from a device or memory on the bus (or from computer
memory to a device) while the processor does something else. DMA is the
fastest method of transferring data to or from computer memory.
down counter
Performing frequency division on an internal signal.
driver
Software that controls a specific hardware device, such as a DAQ device.
E
E Series MIO device
Boards, such as the PCI-MIO-16E-1 and the AT-MIO-16E-2 that use
the MITE chip (on PCI boards for bus mastering), the DAQ-PnP chip for
Plug and Play configuration, the DAQ-STC chip for instrumentation class
counting and timing, and the NI-PGIA for high accuracy analog input
measurements.
EEPROM
Electrically erasable programmable read-only memory. Read-only memory
that you can erase with an electrical signal and reprogram.
EISA
Extended Industry Standard Architecture.
event
The condition or state of an analog or digital signal.
external trigger
A voltage pulse from an external source that triggers an event such as
A/D conversion.
F
factory area
One of three parts of the SCXI EEPROM. The factory area contains
factory-set calibration constants. This area is read-only. The other
EEPROM areas are the default load area and the user area.
FIFO
A first-in-first-out memory buffer. In a FIFO, the first data stored is the
first data sent to the acceptor.
filtering
A type of signal conditioning that allows you to filter unwanted signals
from the signal you are trying to measure.
LabVIEW Data Acquisition Basics Manual
G-6
www.ni.com