Download DAQ basics
Transcript
Glossary DLL Dynamic Link Library. DMA Direct Memory Access. A method by which you can transfer data to computer memory from a device or memory on the bus (or from computer memory to a device) while the processor does something else. DMA is the fastest method of transferring data to or from computer memory. down counter Performing frequency division on an internal signal. driver Software that controls a specific hardware device, such as a DAQ device. E E Series MIO device Boards, such as the PCI-MIO-16E-1 and the AT-MIO-16E-2 that use the MITE chip (on PCI boards for bus mastering), the DAQ-PnP chip for Plug and Play configuration, the DAQ-STC chip for instrumentation class counting and timing, and the NI-PGIA for high accuracy analog input measurements. EEPROM Electrically erasable programmable read-only memory. Read-only memory that you can erase with an electrical signal and reprogram. EISA Extended Industry Standard Architecture. event The condition or state of an analog or digital signal. external trigger A voltage pulse from an external source that triggers an event such as A/D conversion. F factory area One of three parts of the SCXI EEPROM. The factory area contains factory-set calibration constants. This area is read-only. The other EEPROM areas are the default load area and the user area. FIFO A first-in-first-out memory buffer. In a FIFO, the first data stored is the first data sent to the acceptor. filtering A type of signal conditioning that allows you to filter unwanted signals from the signal you are trying to measure. LabVIEW Data Acquisition Basics Manual G-6 www.ni.com