Download MP55 module
Transcript
40 PME-MP55 Acknowledge (MP55 to PC or PLC) CAN identifier 1st data byte 2nd + 3rd data byte 4th data byte 5th-8th data byte 1408 (580 Hex) + module address 96 (60Hex) Index (LSB_MSB) Subindex 0 Response in the event of an error when reading or writing parameters: Error acknowledge (MP55 to PC or PLC) CAN identifier 1st data byte 2nd + 3rd data byte 4th data byte 5th-6th data byte 7th data byte 8th data byte HBM 1408 (580 Hex) + module address 128 (80Hex) Index (LSB_MSB) or 0 Subindex or 0 Additional error code: 10H: Parameter value invalid 11H: Subindex does not exist 12H: Too long 13H: Too short 20H: Service not available at present 21H: - due to local control 22H: - due to device status 30H: Range of values of parameter exceeded 31H: Parameter value too high 32H: Parameter value too low 40H: Value incompatible with other settings 41H: Data cannot be mapped 42H: Exceeds PDO length 43H: General incompatibility Error code: 1: Object access not supported 2: Object does not exist 3: Parameter inconsistent 4: Prohibited parameter 6: Hardware error 7: Type conflict 9: Object attributes inconsistent (subindex does not exist) Error class: 5: Service defective 6: Access error 8: Other error A0563-5.6 en