Download VTech VSP601 Specifications
Transcript
VSP600/VSP601 Administrator and Provisioning Manual Advanced Network Settings VLAN You can organize your network and optimize VoIP performance by creating a virtual LAN for base stations and related devices. Click the link for each setting to see the matching configuration file parameter in Appendix A: Configuration File Settings. Default values and ranges are listed there. Setting Description Enable LAN Port VLAN Enable if the base station is part of a VLAN on your network. Select to enable. VID Enter the VLAN ID (vlan 5, for example). Priority Select the VLAN priority that matches the Quality of Service (QOS) settings that you have set for that VLAN ID. Outbound SIP packets will be marked and sent according to their priority. 7 is the highest priority. NOTE: Configuring QOS settings for your router or switch is a subject outside the scope of this document. LLDP-MED Setting Description Enable LLDP-MED Enables or disables Link Layer Discovery Protocol for Media Endpoint Devices (LLDP-MED). LLDP-MED is a standards-based discovery protocol supported on some network switches. It is required for auto-configuration with VLAN settings. Packet Interval (secs) Sets the LLDP-MED packet interval (in seconds). 38 WebUI: Network