Download VDO Cyclecomputing C05 User`s guide
Transcript
List of ESC/VP21 Commands Communication protocol • Standard baud rate • Data length • Parity • Stop bit • Flow control : 9600 bps : 8 bits : None : 1 bit : Xon/Xoff USB Connection Setup This projector is controlled by ESC/VP21 commands, so if using a USB cable to connect the projector to a computer, you must carry out the following preparations beforehand. Procedure 104 1 Download the "EMP Link21L" utility software from the EPSON website. For details on acquiring the software, please contact one of the service offices listed in the catalog. 2 The USB driver will be downloaded at the same time. Install this USB driver to the computer. For details on installing the software, refer to the EMP Link21L User's Guide which was downloaded together with the software. 3 Set the "COM Port" setting in the "Advanced" menu to "USB". Communication via a USB connection will then be possible.