Download Sharp DV-HR350S Operating instructions

Transcript
Recording
Timer recording
Video
VR
DVD-RW
DVD-RW
DVD-R
VCR
You can program the unit to record
up to 8 programs, up to a year in
advance. Daily or weekly program
recordings are also available.
• Be sure to set the clock before
making a timer programming.
• Insert a recordable disc or a
videotape with a record tab.
4
Select “Timer Programming”
using K / L buttons, then
press ENTER button.
Timer Programming list will
appear.
You can choose the timer
programming menu by pressing TIMER PROG. button. In
this case, continue with step 5.
POWER
Setup > Recording > Timer Programming
Date
-------
1
Start
End
CH
DVD
VCR
Speed
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
5
VCR
DVD
PLAY
Select the program which is
not set up using K / L buttons, then press ENTER button.
1
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
6
SEARCH
MODE
RETURN
SKIP
CM SKIP
Enter the date using K / L
buttons, then press B button.
Setup Menu
Setup > Recording > Timer Programming
2
DVD
Date
Start
End
CH VCR
Speed
JAN / 01 - - : - -AM - - : - -AM CH8 DVD
-------
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
PAUSE
SKIP
2
3
4
5
6
7
e.g. January 1st
JAN/01
L
Daily
Setup
L
When pressing L button at the
current date, timer recording
mode will change as follows.
MON-SAT
L
MON-FRI
L
SAT
L
Playback Setting
L
3
FRI
Note
L
SUN
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
Recording menu will appear.
Setup > Recording
DVD-RW Recording Format
Auto Chapter
DVD
VR mode
10 minutes
Timer Programming
Dubbing Mode
VCR
DVD
L
DEC/31
7
Enter the time to start and
to end using K / L buttons,
then press B button.
Setup > Recording > Timer Programming
DVD
Date
Start
End
CH VCR
Speed
JAN/12 10 :00PM - - : - -AM CH8 DVD
-----
34
• If you have not set the
clock yet:
A clock setting window will
appear after step 4. Continue
with the step 4 in “Auto
Clock Setting” on page 22 or
“Manual Clock Setting” on
page 23 before making a
timer programming.
• Press { or B buttons to
move the cursor to the left
and the right in the timer
programming menu.