Download Technical Reference Manual

Transcript
HARDWARE TECHNICAL REFERENCE MANUAL XT3 Server 12.05
V3X COD Modules LEDs
The following table lists the LEDs available on then V3X COD modules (from left to right):
LED
Color Status
CPU
Green Blinking Indicates CPU activity.
PLAY
Green
Function
On
There is a problem with the module processor.
On
The module is set in play mode by the software.
Off
The module is set in record mode.
On
A valid video signal has been detected on the J8
connector (SD/HD SDI input), whether the module is in
play or record mode.
PVID
Green
TF (transfer)
Green Blinking Data transfers occur between the module and the H3X
board.
M1
—
—
Not used.
M2
M3
M4
6.2.2.
COD Connectivity in SD and HD
Connector Assignments
This section describes the connector assignments and layout for the video standards SD
525i, SD 625i, HD 1080i and HD 720p.
The specific connectivity for HD 3D/1080p Dual Link and 3D/1080p Single Link 3 Gbps is
described in the following sections.
Connector SD mode
J1
HD mode
J5 is factory-wired to the backplane instead of J1. You can
connect J1 instead of J5 if CVBS monitoring is required in
SD or HD mode.
Connector
label
CHAR SD
SDI monitoring is no longer available on J1.
CVBS monitoring output (SD) CVBS monitoring output
(SD, down-converted)
6. Boards Description
83