Download Technical Reference Manual - XTnano 11.01
Transcript
XTnano Server - Version 11.01 - Hardware Technical Reference Manual 5.5. RS422 Connections 5.5.1. RS422 Connector Pinout The RS422 connectors are used to connect a remote control (from EVS or third party) to your server. The cable wiring is a straightforward pin-to-pin connection as illustrated in the following diagram. You should use a shielded cable to avoid electromagnetic interference on long distances. Warning The RESET command line from the remote control is sent through the pin 5 of the RS422 connector. This function should be disabled when the controller on connector #1 is not an EVS controller. The technical specification for the RS422 link is as follows: ◦ 19200 bauds ◦ No parity ◦ 8 data bits ◦ 1 stop bit 5. Hardware Installation and Cabling 25