Download Operating Instructions
Transcript
Preparation Changing the Language TEL Line Settings 1. Press [MENU]. 2. Press [ ] or [ ] repeatedly to select "Basic Selecting the Available Lines Settings". 3. Press [ENTER] two times. 4. Press [ ] or [ ] repeatedly to select the desired language. 5. Press [ENTER], then press [MENU]. Setting the Date & Time Set the unit's date and time setting before using the unit. The date and time are shown on the display in standby mode, and are displayed when playing conversations that were recorded to an SD memory card. 1. Press [MENU]. 2. Select "Basic Settings", then press SELECT . 3. Select "Date & Time", then press SELECT . 4. Using the keypad, enter 2 digits each for the year, month, day of the month, hour (24-hour format), and minute. Example: To enter "Jan. 23, 2008, 7:45 PM", press [0801231945]. to move • If you make a mistake, press the cursor as needed, then enter the correct number. 5. Press SAVE . 6. Press [MENU]. To use the TEL line, the "Line Selection" setting must be set to "IP + TEL". (This is the default setting.) 1. Press [MENU]. 2. Press LINE . 3. Select "IP + TEL". • When "Line Selection" is set to "IP + PC" or "IP + PS", TEL calls cannot be made or received. 4. Press SAVE . 5. Press [MENU]. Setting the Dial Mode Set the dial mode to "Pulse" if the TEL line does not support tone dialling. 1. Press [MENU]. 2. Select "TEL Settings", then press SELECT . 3. 4. 5. 6. Select "Dial Mode", then press Select "Pulse" or "Tone". Press SAVE . Press [MENU]. SELECT . Note • • You can select 12-hour or 24-hour time display (see page 53). The date format varies by the selection made for the "Language" setting. See page 52 for details. Document Version 2010/02 Operating Instructions 25