Download Operating Instructions
Transcript
Electronically Controlled B... Option Panel Operating Instructions Terminal functions are programmed in parameter group 5** Digital In/Out. (See Table 6.2 for factory default parameter settings for drives with an ECB). Bypass functions are programmed in parameter group 31-** Bypass Option (see 6.1.7 ECB Mode of Operation). See the drive’s supporting materials for detailed programming instructions. Parameter Setting title Setting Function 5-01 Terminal 27 Mode Input 0 Customer Interlock 5-02 Terminal 29 Mode Output 1 Auto bypass 5-10 Terminal 18 Digital Input Start 8 Common run/stop 5-11 Terminal 19 Digital Input Run Permissive 52 Run Permissive Customer Interlock 5-12 Terminal 27 Digital Input External Interlock 7 5-31 Terminal 29 Digital Output No Alarm 160 Auto bypass 5-40 Function Relay (0) Start Command Active 167 Run Permissive 5-40 Function Relay (0) Off Delay 0.00 S Run Permissive 6 6 Table 6.2 Parameter Group 5-** Digital In/Out Factory Default Settings MG14I102 - VLT® is a registered Danfoss trademark 43