Download Machine Controller MP2300S Basic Module USER'S MANUAL
Transcript
6.3 Communication with Touch Panel 6.3.1 When MP2300S Acts as Slave Port Number • If you don’t check Automatic Assignment of the port number in the communication setting screen, the automatic assignment will be disabled, and the GP3000 series port number will be fixed at the setting value. • If you check Automatic Assignment of the port number in the communication setting screen, automatic assignment will be enabled, and the GP3000 series port number will be assigned in each case. When you use Automatic Assignment, set Unpassive open mode in the 218IFA screen of MPE720. For more information about Unpassive open mode, refer to 2.2.4 (b) 218IFA Module Detailed Window on page 2-16. For information on the relationship between GP-Pro EX and MPE720 settings, see the table below. MPE720 Side Setting GP-Pro EX Side Setting Automatic Assignment Enable Automatic Assignment Disable Unpassive open Mode Fixed Value Setting √ – √ √ Note: √: connectable, – : unconnectable Ethernet Communications • How to set up Unpassive open mode of the MP2300S (reference) Set Node IP Address to 000.000.000.000 and the Node Port to 0 to enter into the Unpassive open mode. 6 6-71
Related documents
Engineering Tool for MP2000 Series Machine - Support
Machine Controller MP2000 Series 262IF-01 FL
L Excellence Opérationnelle
Machine Controller MP2000 Series 263IF-01
MEMOBUS Ethernet - Pro-face America HMI Store
Scheda controllo assi
Machine Controller MP2200 USER'S MANUAL
YASKAWA Electric Corporation:MP/INVERTER/SERVO Ethernet
User`s Manual
MP2300 Machine Controller Basic Module User's Manual
MP/SERVO Ethernet - Pro-face America HMI Store
Machine Controller MP2200 USER`S MANUAL