Download caution

Transcript
Section 4 Operation
Daily Start Up
Before starting the unit, double check all communication, electrical and plumbing connections. p
The blue LED on the thermostat illuminates to indicate the thermostat
is in standby.
twice. If Auto start is enabled the unit will start. If
If so, press
Auto start is not enabled, or if the blue LED is not illuminated, use the
Initial Start Up procedure described on the previous page.
The Auto start feature is described later in this Section.
NOTE When using oil as a reservoir fluid, we recommend running the
unit at 95°C for 15 minutes to remove any moisture in the fluid. p
Status Display
to bring up the Status Display.
If desired, press
Temperature Scale
Sensor
Heater Duty Cycle
%xx
Refrigeration Duty Cycle
(refrigerated units)
Reservoir Fluid
Temperature
%xx
(in)
°C
Water
+024.29
Reservoir Fluid
If desired, press
Thermo Scientific
again to return to the Start Display.
4-3