Download caution
Transcript
Section 4 Operation Daily Start Up Before starting the unit, double check all communication, electrical and plumbing connections. p The blue LED on the thermostat illuminates to indicate the thermostat is in standby. twice. If Auto start is enabled the unit will start. If If so, press Auto start is not enabled, or if the blue LED is not illuminated, use the Initial Start Up procedure described on the previous page. The Auto start feature is described later in this Section. NOTE When using oil as a reservoir fluid, we recommend running the unit at 95°C for 15 minutes to remove any moisture in the fluid. p Status Display to bring up the Status Display. If desired, press Temperature Scale Sensor Heater Duty Cycle %xx Refrigeration Duty Cycle (refrigerated units) Reservoir Fluid Temperature %xx (in) °C Water +024.29 Reservoir Fluid If desired, press Thermo Scientific again to return to the Start Display. 4-3