Download Carlson Roads 2006

Transcript
This command fillets two segments of a 3D polyline with the given radius. AutoCAD's FILLET command does not
support 3D Polyline entities. Since 3D polylines cannot have arcs, this command draws the fillet arc as a series of
short chords. The elevations along the curve are interpolated from the 3D polyline.
Prompts
Enter fillet radius <10.00>: press Enter
Select a corner point on polyline: pick 3D polyline near meeting point of two segments
Select a corner point on polyline: pick 3D polyline near meeting point of two segments
Select a corner point on polyline: press Enter (to end command)
Pulldown Menu Location: Edit > 3D Polyline Utilities
Keyboard Command: fillet3d
Prerequisite: 3D polyline
Trim 3D Polyline
Function
This command allows you to trim 3D Polylines using another polyline as the cutting edge. The AutoCAD TRIM
command now supports 3D Polylines and other types of entities can be used as the cutting edge.
Prompts
Select trim edge polylines.
Select objects: select polyline
Select 3-D polyline to trim: select 3D poly
Select 3-D polyline to trim: select 3D poly
Select 3-D polyline to trim: press Enter Pressing Enter ends the command.
Pulldown Menu Location: Edit > 3D Polyline Utilities
Keyboard Command: trim3d
Prerequisite: Plot 2D polyline to use as trim perimeter and the 3DPoly lines to trim.
Extend 3D Polyline
Function
This command extends 3D polylines to a boundary edge which is defined by another polyline. The Extend By
Distance routine can be used to extend a 3D polyline incrementally. The AutoCAD EXTEND command supports
3D Polylines and other types of entities can be used as the boundary edge.
Prompts
Select boundary edge: pick a line or polyline
Select line or polyline to extend: pick a 3D polyline
Select line or polyline to extend: press Enter
Chapter 5. Edit Commands
108