Download QUANTAX

Transcript
Quick Reference Guide
4 Software and Analysis Short Reference
4.4 Analysis with Direct Reference
Step
1 Prepare unknown sample and
reference. Select workspace
Example/hints
Objects / Point or
Spectrum
2 Select standard-based method,
disable automatic spectrum
analysis
e.g.: Interactive Standards.mtd
3 Bring reference into analysis
position and adjust microscope
parameters
For precise analysis use low to
medium electron beam currents
(yellow to green area)
4 Click Acquire to acquire spectrum
5 Click Validate and enter the
known element concentrations for
the reference
If an interactive quantification method
was selected, element identification
and background fitting will have to be
performed before entering element
concentrations. Finally, confirm the
element assignment for all chemical
elements that shall be quantified
according to that reference
6 Bring the unknown sample into
analysis position and click Acquire
Don’t change any relevant microscope
settings (beam current, focus, high
voltage ...)
7 Click Quantify
8 Check results
Fig. 4.4-1 Analysis with direct reference
38
Elements quantified according to the
reference will be denoted by two
asterisks **.