Download QUANTAX
Transcript
Quick Reference Guide 4 Software and Analysis Short Reference 4.4 Analysis with Direct Reference Step 1 Prepare unknown sample and reference. Select workspace Example/hints Objects / Point or Spectrum 2 Select standard-based method, disable automatic spectrum analysis e.g.: Interactive Standards.mtd 3 Bring reference into analysis position and adjust microscope parameters For precise analysis use low to medium electron beam currents (yellow to green area) 4 Click Acquire to acquire spectrum 5 Click Validate and enter the known element concentrations for the reference If an interactive quantification method was selected, element identification and background fitting will have to be performed before entering element concentrations. Finally, confirm the element assignment for all chemical elements that shall be quantified according to that reference 6 Bring the unknown sample into analysis position and click Acquire Don’t change any relevant microscope settings (beam current, focus, high voltage ...) 7 Click Quantify 8 Check results Fig. 4.4-1 Analysis with direct reference 38 Elements quantified according to the reference will be denoted by two asterisks **.