Download 4. Reference

Transcript
4.
Reference
Notes
• If the data size or type are changed, the input and display condition are
deleted.
• If the Display Part Screen setting changes to Indirect, the input and display
condition are deleted.
• If an area of the part is extends beyond the borders of the basic window,
only the area inside the borders will be displayed.
• The placement points for the Window and Part objects are as follows:
Object
Placement Point
Window Object
The start point of the edited window screen.
Part Object
The start point where the parts are drawn in the
edited part screen.
• When the Screen Type setting is Storage Image and the Display Part Screen
setting is Indirect, the image from the storage device that corresponds to
the current control device is displayed.
- Position: Set a device to control values for relative location of the part for Fixed,
XY, Line, and Route paths. The size of the path position device is fixed at 16 bit.
The maximum and minimum values restrict the path of a part, based on the device
value (only for line paths).
411