Download 4. Reference
Transcript
4. Reference Notes • If the data size or type are changed, the input and display condition are deleted. • If the Display Part Screen setting changes to Indirect, the input and display condition are deleted. • If an area of the part is extends beyond the borders of the basic window, only the area inside the borders will be displayed. • The placement points for the Window and Part objects are as follows: Object Placement Point Window Object The start point of the edited window screen. Part Object The start point where the parts are drawn in the edited part screen. • When the Screen Type setting is Storage Image and the Display Part Screen setting is Indirect, the image from the storage device that corresponds to the current control device is displayed. - Position: Set a device to control values for relative location of the part for Fixed, XY, Line, and Route paths. The size of the path position device is fixed at 16 bit. The maximum and minimum values restrict the path of a part, based on the device value (only for line paths). 411
Related documents
取扱説明書 (2.89 MB/PDF)
Midas HERITAGE 2000 Specifications
Infinity Speaker IL50 User's Manual
duke energy nuclear material handling program
Installation manual for PV-Module-Manufacturer SAMKO
XP-Manager User`s Manual
XGT Panel
XGT PANEL User`s Manual - Ana
XGT PANEL eXP Series
5th Driving wheel_User_ver_A_Eng.indd
MSc Thesis: The Design, Implementation and Analysis of a
CKPR-D01 - Premier