Download File

Transcript
Multi-format, Multi-standard Waveform Monitors
WFM700HD • WFM700A • WFM700M
WFM700 Video Session display.
WFM700 Ancillary Data display.
WFM700 Auxiliary Data Status display.
The following table shows the supported signal formats:
Standard
Physical
Interface
Image
Format
Field/
Frame
Rate
60 Hz
Field/
Frame
Rate
59.94 Hz
Field/
Frame
Rate
50 Hz
Field/
Frame
Rate
30 Hz
Field/
Frame
Rate
29.97 Hz
Field/
Frame
Rate
25 Hz
Field/
Frame
Rate
24 Hz
Field/
Frame
Rate
23.98 Hz
274M
292M
1920x
1080i
X
(D-292)
X
(E-292)
X
(F-292)
274M
292M
1920x
1080p
X
(G-292)
X
(H-292)
X
(I-292)
X
(J-292)
X
(K-292)
274M
292M
1920x
1080sF
X*2
X*2
X*2
X
X
240M/260M
292M
1920x
1035i
X
(A-292)
X
(B-292)
296M
292M
1280x
720p
X
(L-292)
X
(M-292)
X
X
ITU-R
BT.601*1
259M
720x
576i (625)
ITU-R
BT.601*1
259M
720x
483i (525)
X
X
(C-259)
X
(C-259)
*1 ITU-R BT.601 defines sampling for SD serial digital video per SMPTE 259M and ITU-R BT.656.
*2 These segmented-frame format signals are detected as their corresponding interlaced format.
“Status-at-a-Glance”
Video Session Display
Presence or absence of color gamut errors
CRC values
In addition to detecting a wide range of
video signal characteristics, the WFM700
waveform monitors offer valuable status
and error reporting capabilities, like the
unique Video Session display. This display
summarizes a variety of statistics relevant
to video content health and standards
compliance, including:
Signal format and colorimetry
Stuck bits indicator
Presence or absence of ancillary data,
including embedded audio, closed
caption data, or timecodes
Errored seconds, errored fields, and
% errored fields statistics
Presence of closed caption information in
accordance with EIA608 and, if presence,
decode and display the data on picture display
Presence of closed caption information
embedded in accordance with EIA708 and
ARIB B37 standards
Timing Reference and
Auxiliary Data Monitoring
Ancillary Time Code (ATC) and Vertical
Interval Time Code (VITC) values
Every WFM700 Series product can detect
information contained in the horizontal and
vertical synchronization intervals in the
digital video, including:
Presence of V-chip data and, if presence,
the decoded rating information
Start-of-Active-Video (SAV) and
End-of-Active-Video (EAV)
Error detection and reporting per
SMPTE RP165 for standard definition
and SMPTE 292M for high definition
Presence of ARIB STD-B39, ARIB STD-B35,
ARIB TR-B22, and ARIB TR-B23
Depending on your preference, WFM700
waveform monitors can either show the SAV
and EAV in waveform display or strip out
this data prior to display.
Waveform Monitors • www.tektronix.com/video_audio
3