Download Administration Guide
Transcript
Chapter 10 – Image Processing Before Binary Line Removal After Binary Line Removal Binary Noise Removal Noise can originate from carbon or dirt particles on scanners, fax machines, or copiers. Noise removal takes out extraneous specks from an image. If the image contains text, this filter may remove periods and dots from sentences and letters. To avoid removing essential parts of text characters, assign the Minimum Separation value to be greater than the distance between dots and the lower parts of letters. To apply cropping and noise removal to an image, perform the noise removal first for best results. Maximum Height and Width This setting defines the maximum height/width in millimeters (in whole or decimal numbers) of an object to be considered noise. Maximum Area Percentage This value is defined by the specified height/width of an object to be removed as noise. The Maximum Area Percentage setting detects long narrow objects such as lines, decorative banners, and highlight areas that may appear both vertically and horizontally on a page. For example, to remove colored banners with the dimensions 5" x 1" or 1" x 5", you can assign the Maximum Height and Maximum Width values to five inches. However, a 5" x 5" picture would also be detected as noise and removed. To avoid this problem, assign 20% so that only the banner area is detected as noise, regardless of its orientation. PaperVision® Capture Administration Guide 261
Related documents
カタログダウンロード - 日本カーネルシステム
E 1.7 User Manual - Software and Systems Engineering
ParaView`s Comparative Viewing, XY Plot, Spreadsheet View
PaperVision® Enterprise
Solutions Report - Digitech Systems
User Guide - DataChambers
User Guide - D2Xchange
User Guide - DataChambers
F-ZTAT microcomputer On-Board Programming Adapter
SH7058 E6000H Emulator HS7058EPH60H, SH7058S, SH7059
Document Imaging
DIAMOND VIEW Scanners - Mitsubishi Electric Australia