Download MULTIPLE PROTOCOL INTEGRATED ACCESS

Transcript
DT-9480, DT-4180, DT-4280, DT-4284 User Manual
3 PHYSICAL DESCRIPTION
3.1
POWER INTERFACES
48VDC Power
Rack-mounted or operating stand-alone, the DT-4180, DT-4280, and DT-4284 accept
DC power input directly from a 48V DC power source which connects to the three
position (return, -48, and ground) terminal block labeled 48V DC on the faceplate. The
terminal block connectors accommodate 10 awg (American Wire Gauge) to 14 awg wire.
A strain-relief clamp is available separately for DC wire stabilization. The actual voltage
range of the DT-4180 and DT-4280 is 18 through 72 volts inclusive.
The DT-9480 accepts 48VDC power on a circular connector. The DT-9480 voltage
tolerance is +/- 10%. The DT-4284 voltage tolerance is +/- 10%.
24VDC Power
Rack-mounted or operating stand-alone, the DT-4280 accepts DC power input directly
from a 24 VDC (nominal) via a circular connector. The circular connector is labeled
24VDC on the DT-4280 faceplate. The actual voltage range is 18 through 72 volts
inclusive.
AC Power
For this application, a separate AC power supply is available which plugs into a standard
115/240V AC outlet. The power supply has a six-foot cable that terminates with a barrel
connector. The barrel connector plugs into the circular connector labeled 24VDC on the
DT-4280 faceplate. The barrel connector plugs into the circular connector labeled 5VDC
05/04/05
9
Datatek Applications Inc.