Download SmartServer Documentation
Transcript
57 You can also route calls to a telephone number obtained dynamically from a database. Just enter the name of the field in this box and select the name of the address book from the Address Book list. When a caller is found in the address book specified and all the other conditions are met, SmartServer will route the call to whatever telephone number is in the field you entered in Destination of the record that the caller was found in. Once you have finished creating your rule, click OK and it will be added to the list. If you wish to modify a previously created rule, highlight it and click the Properties button. To remove a rule, click the Remove button after highlighting the rule you no longer want. If you have added more than 1 rule, the Move up and Move down buttons become visible. These buttons enable you to specify an order in which rules are processed. SmartServer will process the rules in the order in which they are listed on the Routing tab of SmartServer Configuration, so you should use the Move up and Move down buttons to select an order of priority for your rules. Once a call has been routed by one rule, any other rules will not affect it. In the Caller tel, Called tel, and Ringing ext boxes on the Routing Condition window, you may enter multiple numbers separated by commas. So for instance to route calls from the 01480 area code and the 01595 area code, you would enter 01480*,01595* in the Caller tel box. An asterisk can be used to represent zero or more unspecified characters at the beginning or end of the string. For instance, 144* would match 144, 1447, 144595, etc and *200 would match all numbers that end in 200, including 200. SmartServer - Oak