Download Hitachi Command Control Interface

Transcript
Parameter
dev_group
Default
None
Type
Character string
Limit
31 characters
Recommended value =
8 char. or less
port #
None
Character string
31 characters
target ID
None
Numeric value1
7 characters
LU#
None
Numeric value1
7 characters
MU#
0
Numeric value1
7 characters
Serial#2
None
Numeric value
12 characters
CU:LDEV(LDEV#)
None
Numeric value
6 characters
dev_name for
HORCM_CMD
None
Character string
63 characters
Recommended value =
8 char. or less
Notes:
1.
Use decimal notation for numeric values (not hexadecimal).
2.
For VSP G1000, add a “3” at the beginning of the serial number. For example, for
serial number 12345, enter 312345.
Do not edit the configuration definition file while CCI is running. Shut down
CCI, edit the configuration file as needed, and then restart CCI.
Do not mix pairs created with the "At-Time Split" option (-m grp) and pairs
created without this option in the same group defined in the CCI
configuration file. If you do, a pairsplit operation might end abnormally, or
S-VOLs of the P-VOLs in the same consistency group (CTG) might not be
created correctly at the time the pairsplit request is received.
Configuration definition file settings
(1) HORCM_MON
The monitor parameter (HORCM_MON) defines the following values:
•
Ip_address: The IP address of the local host. When HORCM has two or
more network addresses on different subnets for communication, this
must be set to NONE.
•
Service: Specifies the UDP port name assigned to the HORCM
communication path, which is registered in "/etc/services"
("%windir%\system32\drivers\etc\services" in Windows,
"SYS$SYSROOT:[000000.TCPIP$ETC]SERVICES.DAT" in OpenVMS). If a
port number is specified instead of a port name, the port number will be
used.
•
Poll: The interval for monitoring paired volumes. To reduce the HORCM
daemon load, make this interval longer. If set to -1, the paired volumes
are not monitored. The value of -1 is specified when two or more CCI
instances run on a single machine.
•
Timeout: The time-out period of communication with the remote
server.
CCI software environment
Hitachi Command Control Interface User and Reference Guide
2–15