Download Programmable DC Power Supply

Transcript
PSU Programming Manual
:SYSTem:COMMunicate:SERial[:RECeive]:T
RANsmit:PARity
Set
Query
Description
Sets or queries the parity of the UART connection.
Note: the setting will only be valid after the power
has been cycled.
Syntax
:SYSTem:COMMunicate:SERial[:RECeive]:TRANsmit
:PARity <NR1>
Query Syntax
:SYSTem:COMMunicate:SERial[:RECeive]:TRANsmit
:PARity?
None
Parameter/Return 0
parameter
Odd
1
Even
2
Example
SYST:COMM:SER:TRAN:PARity?
>1
Indicates that odd parity is used for the UART
connection.
:SYSTem:COMMunicate:SERial[:RECeive]:T
RANsmit:SBITs
Set
Query
Description
Sets or queries the number of stop bits used for the
UART connection. Note: the setting will only be
valid after the power has been cycled.
Syntax
:SYSTem:COMMunicate:SERial[:RECeive]:TRANsmit
:SBITs<NR1>
Query Syntax
:SYSTem:COMMunicate:SERial[:RECeive]:TRANsmit
:SBITs?
1 stop bit
Parameter/Return 0
2 stop bits
parameter
1
Example
SYST:COMM:SER:TRAN:SBITs?
>1
Indicates that one stop bit is used for the UART
connection.
96