Download User Manual - Sim

Transcript
Sim-Avionics
Version 1.40 : 22nd November 2013
FSUIPC MCP Values
MCP Values are assigned as 2 byte (Word)
[FSUIPC_MCP_INPUTS]
MCP_SPEED=53A0
MCP_HDG=53A2
MCP_ALTITUDE=53A4
MCP_VS=53A8
Note:
MCP_SPEED
MCP_HDG
MCP_ALTITUDE
MCP_VS
2
2
4
2
bytes
bytes
bytes
bytes
(Word)
(Word)
(Dword)
(Word)
// Use FS formating
// HDG = value /65536*360
MCP_HDG_FS_FORMAT=1
MCP_HDG is expected FS formatting - like offsets 07CC.
ie: 324deg = 324 / 360 * 65536 = 58982
write 58982 to the MCP_HDG offset
// ALT = value ft /3.28084*65536
MCP_ALT_FS_FORMAT=1
MCP_ALTITUDE is expected FS formatting - like offsets 07D4.
ie: 31700ft = 317(00) = 317 * 1997537 = 633219229
write 633219229 to the MCP_ALTITUDE offset
if MCP_ALT_FS_FORMAT=0 or MCP_HDG_FS_FORMAT=0
you can directly write 317 or 324 to the offsets.
[FSUIPC_EFIS_INPUTS]
CPT_BARO=530A
FO_BARO=530C
MINIMUMS=04FA
All EFIS Inputs Offset lengths are 2 bytes (Word)
MCP_SPEED works slightly differently to the other offsets. To allow this offset to also control
MACH the server is looking at the delta difference as the value changes. Therefore it is possible
for the MCP speed to be out of sync with the value in this offset.
Additional Offset Detail
Most offsets with the exception of the one's specified earlier are
byte or length 1
44