Download PG 702 Programming Device

Transcript
Editing STL Programs
5.7
GOTO Network or Line Number
To go to a specific network and line number, use the FCT
combination. The display shows the current network, line 1.
3
key
NETWORK #: 1
LINE #: 1
Enter the network number and line number that you want to go to and press the
key. The editor moves to the specified statement and displays it as the
current line. If you enter a network number that is greater than the highest network
number in your program, the PG 702 displays the specified line in the last network.
If you enter a line number that is greater than the highest line in a specific network,
the PG 702 displays the last line in that network. All statement list programs begin
with network 1 and line 1. If you enter a zero, the PG 702 displays the first line or
network. Table 5-3 contains examples of GOTO entries and results.
Table 5-3
GOTO Results
Entry
Action
Goes to network 1, line 1
NETWORK #: 0
LINE #: 0
Goes to network 4, line 1
NETWORK #: 4
LINE #: 0
Goes to network 4, line 1
NETWORK #: 4
LINE #: 1
Goes to last network, line 1
NETWORK #: 3000
LINE #: 0
NETWORK #: 3000
If there are only 10 lines in the last
network, this entry goes to the last line
in the last network.
LINE #: 500
PG 702 Programming Device
C79000-G7076-C709-01
5-15