Download Chapter 4 Basic Operations
Transcript
⑤ PTZ decoder and DVR address does not match each other ⑥ When multiple decoders are connected, 120 ohm resistance is needed on the most remote end of PTZ decoder AB line, to eliminate reflex and impedance matching, or PTZ control will not be stable. 13. Motion detection does not work? A: Check the motion detection time and motion detection zone and make sure that they are right setup, and check the sensitivity setting. 14. Alarm does not work? A: Check the correctness of alarm setting and alarm connection, and make sure that alarm signal input is correct. 15. Why does the Buzzer keep sounding? A: Please check if motion detection is on and the system has detected motion, make sure the HDD is being detected and has sufficient space available; check if video has lost etc. Appendix System connection diagram 16 Channel Embedded Digital Video Recorder User Manual 42