Download Chapter 4 Basic Operations

Transcript
⑤ PTZ decoder and DVR address does not match each other
⑥ When multiple decoders are connected, 120 ohm resistance is needed on the most remote end of PTZ
decoder AB line, to eliminate reflex and impedance matching, or PTZ control will not be stable.
13. Motion detection does not work?
A: Check the motion detection time and motion detection zone and make sure that they are right setup, and
check the sensitivity setting.
14. Alarm does not work?
A: Check the correctness of alarm setting and alarm connection, and make sure that alarm signal input is correct.
15. Why does the Buzzer keep sounding?
A: Please check if motion detection is on and the system has detected motion, make sure the HDD is being
detected and has sufficient space available; check if video has lost etc.
Appendix
System connection diagram
16 Channel Embedded Digital Video Recorder User Manual
42