Download Application Note AN026

Transcript
Application Note AN026
Summary
A summary of the application parameters is given in Table 1.
Table 1: Application Parameters
System clock frequency:
Fundamental characteristics
14.7456 MHz
RF data rate:
One-way latency:
76.8 kb/s (9.6kB/s)
93 ms
Sampling frequency:
Resolution:
PCM-code:
Bandwidth of input signal:
8 kHz
8-bit
Linear, unsigned (0-255)
0-3 kHz (speech signal)
Compression of speech data:
Compression ratio:
Performed by DPCM
2:1
Functionality
By Time-division duplex (TDD)
Point-to-point, master/slave-configuration
DES encryption/decryption, 56-bit key.
Full duplex operation:
Addressing:
Encryption:
System overview
A block diagram of the system is given in Figure 1. The transmission chain shows the data
flow of how the speech signal is processed from start to end of the system.
Transm itter chain
Microphone
amplifier
Antialiasfilter
ADC
DPCMencoder
TransmitFIFO
DES
Encryption
RFmodulator
Antenna
Microphone
Antenna
Receiver chain
RFdemodulator
ReceiveFIFO
DES
decryption
DPCMdecoder
Loudspeaker
DAC
(PW M)
Reconstr.filter
Headset
buffer
Figure 1: System overview and signal flow
A received radio signal is received by the antenna and demodulated by the first stage in the
reception chain. The received signal is processed through the stages shown in Figure 1.
Finally, the loudspeaker reproduces the original speech signal. The receiver chain performs
the inverse operations of the transmitter chain. Since the application presented in this
application note supports full duplex operation, a radio unit contains both a transmitter and
receiver chain making it capable of both transmission and reception.
SWRA066
Page 2 of 23