Download EOS System Message Guide

Transcript
CHAPTER 2. SYSTEM MESSAGES
2.3
ACL Messages
HW RESOURCE FULL: Hardware resources are insufficient to program all ACLs (%s)
Severity: Error
Explanation: The switch is unable to program all ACLs due to insufficient hardware resources.
Recommended Action: Reconfigure your ACLs to reduce the size and/or complexity of the ACL.
HW RESOURCE NORMAL: All ACLs are programmed in hardware (%s)
Severity: Error
Explanation: The switch was able to program all the ACLs in the hardware.
Recommended Action: No action is required – this message is for information only.
IP6ACCESS: list %s %s %s %s %s -¿ %s%s
Severity: Info
Explanation: A packet has matched one of the rules with ’log’ option in the specified IPv6 access-list.
Recommended Action: No action is required – this message is for information only.
IPACCESS: list %s %s %s %s
Severity: Info
Explanation: A packet has matched one of the rules with ’log’ option in the specified IP access-list.
Recommended Action: No action is required – this message is for information only.
IPV6 ERACL ROUTEDPORT: The IPv6 Egress ACL that was applied to interface %s will now be installed
Severity: Info
Explanation: IPv6 Egress ACLs on routed ports are supported. Since the interface has become a routed port, the
previously configured IPv6 Egress ACL will now be installed
Recommended Action: No action is required – this message is for information only.
IPV6 ERACL SWITCHPORT: The IPv6 Egress ACL applied to switchport %s will not be installed until the
switchport is converted to a routed port
Severity: Info
Explanation: IPv6 Egress ACLs on switch (non-routed) ports are not yet supported but the user configuration will be
stored. The ACL will become active when the interface is changed to a routed interface
Recommended Action: No action is required – this message is for information only.
IPV6 RACL DSCP: IPv6 ACLs with DSCP will not be applied to VLAN interfaces
Severity: Info
Explanation: This platform does not support the application of IPv6 ACLs with DSCP to VLAN interfaces
Recommended Action: No action is required – this message is for information only.
MACACCESS: list %s %s %s %s %s -¿ %s %s
Severity: Info
Explanation: A packet has matched one of the rules with ’log’ option in the specified MAC access-list.
Recommended Action: No action is required – this message is for information only.
EOS User Manual
8