Download Cortex Manual
Transcript
Cortex 1.0 User’s Manual Chapter 13: Skeleton Types This can take several seconds to minutes, depending on the length and complexity of the skeleton. If you are using one of the streaming Talon plugins, the skeleton data is available after the calculations are finished. You can scrub back and forth in the Post Processing mode or press the Play button and both the marker data and the skeleton (htr type) data are available to the streaming Talon plugins (like Maya). Skeleton Option Details (as selected from Tree View) Skeleton Builder (SkB) Engine Bone segments are defined from one marker to another, typically virtual markers that represent joint centers. The advantage to this method is the fast and direct calculations from markers to joint centers to bone segments. The disadvantage is primarily for high resolution animation use since the joint centers are calculated directly from real and virtual marker locations. Bone lengths will vary slightly from frame to frame due to marker-skin motion which can cause the animated character’s skin to distort and not look as good as expected. Calcium Solver 1.3.1 This is a very different method of calculating the skeleton motion from marker locations. Typically, the skeleton is defined within one of the several animation packages and exported and saved in an HTR and a MOD (model) file. This skeleton is not allowed to change size to fit the motion data, but the Solver engine software uses a best fit Global Optimization of the marker data to conform to the rigid underlying skeleton. This results in the very best way of animating characters from mocap data, but to use it in Cortex, you need to save a .mod file with the same name as your prj file. The Calcium software allows you to export a .mod file. The Solver Global Optimization method is resident in three of Motion Analysis Corporation's software products: Cortex, Calcium, and the SIMM modeling package. SIMM Calcium Model This uses the Solver engine with the same advantages as the Calcium Solver method above, but with a known and fixed marker set that was developed for biomechanics use. To use it, you must use some variation of the OrthoTrak marker set, which has several required markers (such as the Knee, Ankle, Hip and Shoulder markers) and many optional markers that will introduce more detail and more bone segments into the solution. The big advantage over the Calcium Solver model is that you do not need to create a MOD file, which means that you do not need to use or learn the Calcium software. Cortex creates an even more thorough JNT (joint) file when you export the SIMM Calcium Model. You do need to have the person standing in a neutral pose (typically with the arms out in a T-pose, feet slightly apart and thumbs forward). 13-5