Download CANopen Communication Protocol
Transcript
2 Object Dictionary Data type The data types that an object can have are the following: Name Description Interval Bytes Integer8 8 bit values -128,...,+127 1 Integer16 16 bit values -32768,...,+32767 2 Integer32 32 bit values -2147483648,...,+2147483647 4 Unsigned8 8 bit values 0,...,255 1 Unsigned16 16 bit values 0,...,65535 2 Unsigned32 32 bit values 0,...,4294967295 4 Visible string ASCII symbols 20h,...,7Eh ≤15 String of octets ASCII symbols 00h,...,FFh ≤16 CiA Reference The Reference row in the definition of an object contains a reference to the CAN profile definition used in the CiA (CAN in Automation) manual. 2.1.2 Object description table Description of elements Subindex Sequential number identifying the object from other objects with the same index. Description Indicates the name of the parameter. Access Indicates the object’s access attribute. PDO mapping Determines whether or not the object can be mapped in a PDO. Unit Indicates the unit of measurement for the object. Interval of values Indicates the interval of values for the object. Preset value Indicates the preset value of the object. Recordable Indicates whether or not the object can be recorded in a permanent manner. Subindex The subindex of an object comprises a hexadecimal number identified by a lower case letter ‘h’ at the foot of the object’s subindex. In the case of single objects (VAR), only the subindex 00h will be assigned. In the case of intervals of values (ARRAY or RECORD), the value of subindex 00h determines the size of the group of values. Description Indicates the name of the parameter in question. 8 CNI Engineering Dizionario Oggetti-en.fm (14-05-07)