Download TTM8000 - Roithner Lasertechnik

Transcript
“G-Mode Start/Stop” that will give you a 41.2ps resolution for measurement of up to 65µs.
There is also the option to use M-Mode, that gives you a resolution of down to 1ps. However the
variance of the result is 10ps, so the last few bits of a single measurement are more or less
worthless when using extremely high resolution and massive averaging of many measurements is
required to obtain optimal results. Furthermore M-Mode has another significant drawback: In all other
other modes, a Start-event can occur at any time and a new timescale starts when ever there is a
Start-event. In M-Mode you must define how long your timescale will be before you start your
measurement, a Start-event must not occur before the timescale of the previous Start-event has
expired (plus 1.2µs for post-processing) and you can have at most one Stop-event per channel after
any Start-event. Thus the maximal event rate is rather limited in M-Mode.
If you need more information about the various measurement modes, their advantages and limitations you
should look at the data sheet of the acam GPX-TDC chip that forms the core of the TTM8000 board. It can
be found at http://www.acam.de/products/time-to-digital-converters/tdc-gpx/
13/60
TTM8000