Download enable

Transcript
3-48
Chapter 3: Command Set
IO50 / IO100 User's Manual
TEST
:ADDR
Function:
Designates a field as an address input in Memory Emulation.
Syntax:
ADDR <field_name>
Remarks:
This command is valid only in the Memory Emulation test . It specifies a
input field to be used as an address into the shared memory pool for emulating ROM or RAM . The pins in this field are specified by the user when the
field name is defined . The order in which the pins are listed in the definition command will be most significant first to least significant last (right to
left) . The field can be no more than 13 pins wide, since only 8192 vector
addresses are available for memory emulation.
Example:
TEST:NAME A:ADDR ROMADDR
See Also:
MEMEMULATION, FIELD
TEST
:ADDR?
Rev. 02
Function:
Queries the current specified address field for Memory Emulation.
Syntax:
ADDR?
Response:
field name (string of 8 or less characters).
Example:
TEST:NAME A:ADDR?
ADDR_FLD
See Also:
TEST, MEMEMULATION, FIELD
Interface Technology
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com