Download enable
Transcript
3-48 Chapter 3: Command Set IO50 / IO100 User's Manual TEST :ADDR Function: Designates a field as an address input in Memory Emulation. Syntax: ADDR <field_name> Remarks: This command is valid only in the Memory Emulation test . It specifies a input field to be used as an address into the shared memory pool for emulating ROM or RAM . The pins in this field are specified by the user when the field name is defined . The order in which the pins are listed in the definition command will be most significant first to least significant last (right to left) . The field can be no more than 13 pins wide, since only 8192 vector addresses are available for memory emulation. Example: TEST:NAME A:ADDR ROMADDR See Also: MEMEMULATION, FIELD TEST :ADDR? Rev. 02 Function: Queries the current specified address field for Memory Emulation. Syntax: ADDR? Response: field name (string of 8 or less characters). Example: TEST:NAME A:ADDR? ADDR_FLD See Also: TEST, MEMEMULATION, FIELD Interface Technology Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com