Download Simulation - Agilent Technologies
Transcript
Chapter 11: Measurements: Linear
S-Parameters
This S-parameter (or scattering parameter) measurements are complex functions of
frequency. The frequency range and intervals are as specified in the Linear Simulation
dialog box. The s-parameters assume a 50-ohm reference impedance unless otherwise
specified. The s-parameters for an n-port network are of the form:
Sij
for i, j equal 1, 2, ... n
Details on the S-parameters and their application are found in Section x.x of this Manual.
Values: Complex matrix versus frequency.
Simulations: Linear, EMPOWER
Default Format:
Table: dB, angle Graph: dB
Smith Chart: dB, angle
Commonly Used Operators:
Operator
Description
Result Type
ang(S[1,1])
Angle in range -180 to 180 degrees
Real
gd(S[2,2])
Group Delay
Real
ql(S[2,1])
Loaded Q
Real
{ Other Operators: db(), mag(), re(), im() }
Examples:
Measurement
Result in graph, Smith chart,
optimization, or yield
Result on table
S[2,2]
dB Magnitude of S22
dB Magnitude plus angle of S22
ql(S[2,1])
Loaded Q of S21
Loaded Q of S21
mag(S[2,1])
Linear Magnitude of S21
Linear Magnitude of S21
S
gd(S[2,1])
--Group delay of S21
Shows dB Magnitude plus angle of all S Parameters
Group delay of S21
247
Related documents
Simulation - Agilent Technologies
GENESYS 2004 Enterprise Simulation
GENESYS 2003 Enterprise Simulation
VPOD Handheld Manual White / Blue Model
USER`S MANUAL
Beta User Guide - Neighbourhood Statistics
ADS - Sonnet Software
Study Guide - Utah Safety Council
Technical Report of the ISIS LLRF
Thermal Printer Setup & Operation Manual
VPOD Handheld Manual Black / Silver Model
IFBR1a Manual - Lectrosonics.com