Download Programming manual

Transcript
Configuration Mode - Complete menu (FULL)
I-OdrCCtLFUNFLtCOM-
High speed configuration
The logic inputs enable selection of the desired high speed.
Desired
High speed
Setting
Parameter
State
HSP
SH2
nO
SH4
nO
SH2
assigned
SH4
nO
SH2
nO
SH4
assigned
SH2
assigned
SH4
assigned
HSP2
HSP3
HSP4
Code
Name/Description
Adjustment range
Factory setting
LSP to tFr
50 or 60 Hz
according to BFr,
max TFr
Function menu (continued)
FUnSPL-
Speed limit menu
M High speed
HSP
T
Motor frequency at maximum reference, can be set between Low speed LSP and Maximum frequency
tFr page 55.
If tFr is decreased below the value defined for HSP, then HSP automatically decreases to the new
value of tFr.
This parameter is already included in "my menu" section, page 44.
SH2
nO
L1H
L2H
L3H
L4H
SH4
nO
L1H
L2H
L3H
L4H
HSP2
T
T
76
M 4 HSP assignment
v No
v L1h: LI1 active high
v L2h: LI2 active high
v L3h: LI3 active high
v L4h: LI4 active high
nO
M High speed 2
LSP to tFr
as HSP
M High speed 3
LSP to tFr
as HSP
LSP to tFr
as HSP
Visible only if 4 HSP assignment SH4 is not set to nO.
HSP4
T
nO
Visible only if 2 HSP assignment SH2 is not set to nO.
HSP3
T
M 2 HSP assignment
v No
v L1h: LI1 active high
v L2h: LI2 active high
v L3h: LI3 active high
v L4h: LI4 active high
M High speed 4
Visible only if 2 HSP assignment SH2 and 4 HSP assignment SH4 are not set to nO.
Parameter that can be modified during operation or when stopped.
BBV28581 04/2009