Download 1 FM07I4A

Transcript
The Zeroplus Logic Analyzer
User’s Manual V3.10
4.5.7
CAN 2.0B Analysis
Preface
Add Protocol Analyzer function to analyze CAN 2.0B transport protocols data. CAN 2.0B serial transmission,
there are two signal channels, CANH and CANL, which match with baud ratio judge serial data. If you want to
change serial data into Bus format, you need to analyze this function with LA. a dialog box needs to be added;
you should set up a Protocol Analyzer CAN 2.0B dialog box.
CAN 2.0B Introduction
1. Brief Introduction
Features
CAN 2.0B (Controller Area Network) is an Asynchronous Transmission Protocol. It costs low, sky-high use rate,
far data transmission distance (10KM), very high data transmission bit (1M bit/s), sending information without
appointed devices according to message frame, dependable error disposal and detection error rule, message
automatism renewal after damage, and node can exit Bus function on the serious error .
Applications
CAN 2.0B is used for automotive electronics correlation systems connection.
2. Protocol Analyzer Signal Specifications
Parameter
Name of Protocol Analyzer
Required No. of Channels
Signal Frequency
Appropriate Sampling Rate
Same Data Time Per Bit
Name of Syn. Signals
Data Verification Point
Value
CAN 2.0B
1
Not fixed, around 12MHz, 13MHz and 19,2MHz
100MHz
□Yes
■No
CAN 2.0B
Low signals>190us converts to High signals>
40us
3. Protocol Analyzer IO Description
Name
CANL
CANH
Function
The main signal source of transmission data
Signal is opposite to the signal source of transmission data
4. Protocol Analyzer Electrical Specifications
Parameter
Min.
Logic Input High
2.5
Logic Input Low
Type
Max.
Unit
Note
V
0.5
V
CAN 2.0B Frame Specification
CAN 2.0B can separate into frames as follows: Data Frame, Remote Transmit Request Frame, Error Frame,
Overload Frame. Because CAN2.0B is transmitted by the format of different signals, the signal can separate into
CANL and CANH, and the signal direction of CANH is opposite to that of CANL. Next we analyze CAN 2.0B signal
with the standard of CANL.
Basic Data Frame
Data frame can be divided into Basic CAN and Peli CAN, Data Frame of Basic CAN transmission. As follows,
155
FM07I4A