Download User Guide

Transcript
The Zeroplus Logic Analyzer
User’s Manual Ver. 3.10
Software Basic Setup of Protocol Analyzer HDQ
Fig4-113 - Protocol Analyzer HDQ Configuration dialog box
Set the HDQ Configuration dialog box.
Pin Assignment:
HDQ has only one signal channel, therefore it only specifies the name of the channel and marks the
selected channel.
Protocol Analyzer Name: Display the name of the selected Bus.
Channel: Preset as A00.
Timing Settings(us):
Set the time for Break, Address, Read, Write, Data and Recovery.
Protocol Analyzer Color: Users can vary the colors of the decoded packet.
Operating Instructions
Open the LAP operation interface.
Fig4-114 - Operation Interface
138
FM07I4A