Download TURNS Tutorial/Reference Manual
Transcript
Chapter 1 INTRODUCTION Sequence 1 ------------| * * * | | * * * | |<* * *> | | v ^ | | <* * *>| | * * * | | * * * | ------------- Sequence 4 - Dual Lead ------------------------| * ^ | * * + | | * ++++| * * + | | *> |<* * +> | | | v ^ | | <* | <+ * *>| |++++ * | + * * | | v * | + * * | ------------------------- ^ | | North | Sequence 2 - North Lead ------------------------| * * * ^ | * * + | | * * * ++++| * * + | |<* * *> |<* * +> | | v | v ^ | | | <* * *>| | | * * * | | | * * * | ------------------------- Sequence 5 - Dual Lead, North Overlap ------------------------------------| * ^ | * * * ^ | * * + | | * ++++| * * * ++++| * * + | | *> |<* * *> |<* * +> | | | v | v ^ | | <* | | <+ * *>| |++++ * | | + * * | | v * | | + * * | ------------------------------------- Sequence 3 - South Lead Sequence 6 - Dual Lead, South Overlap ------------------------------------------------------------| | * * * | | * ^ | | * * + | | | * * * | | * ++++| | * * + | | |<* * *> | | *> | |<* * +> | | ^ | v ^ | | | ^ | v ^ | | <* * *>| <+ * *>| | <* | <* * *>| <+ * *>| |++++ * * * | + * * | |++++ * |++++ * * * | + * * | | v * * * | + * * | | v * | v * * * | + * * | ------------------------------------------------------------____________________________________________________ Sequence 7 - Split Phase ------------------------| * * * ^ | | | * * * ++++| | |<* * *> | | | v | ^ | | | <* * *>| | |++++ * * * | | | v * * * | ------------------------- Sequence 8 - Lead/Lag ------------------------------------| * * * ^ | * * | | | * * * ++++| * * | | |<* * *> |<* * | | | v | v ^ | ^ | | | <+ * *>| <* * *>| | | + * * |++++ * * * | | | + * * | v * * * | ------------------------------------- Rotate diagrams clockwise 90 degrees for phase types of East/West movements. Use PERMISSIVES to allow left turns shown with "+" symbols. Use OVERLAPS to allow right turns shown with "+" symbols where exclusive right turn lanes exist. Use LEADLAGS to reverse the order of a phase type. Phase types are combined for both directions to create a sequence code. E.g., SEQUENCE 53 is a Dual Lead, North Overlap (5) for the North/South movements followed by a West Lead (3) for the East/West movements. Figure 1-2 Phasing Codes for TEAPAC Version Number TURNS -9- Tutorial