Download gaddsref
Transcript
Collect Routines GADDS Software Reference Manual /OSCILLATE=<s>..(Sample Osc) [None] /AMPLITUDE=<n> (Amplitude) [0.0] See Section 5.30. /AUTOZALIGN ......(Auto Z Align) [No] See Section 5.30. 5.45 Collect > Scan > Master • Place frame buffer into single detector or dual master mode Menu Command: Collect > Scan > Master Accelerator: None User Level: 3 NOTE: On failure, the algorithm proceeds to the next target and continues collecting data. SLAM Syntax: SCAN /MASTER $1 /SEND_CONFIG SCAN /MASTER is used to select single or dual detector operation mode and to optionally update the SLAVE configuration menu. NOTE: Invoking SCAN /MASTER on a frame buffer connected to a GGCS (not a SLAVE frame buffer) may place the GGCS in an inoperable mode. The most recent release of the GGCS software fixes this problem. The MASTER frame buffer can function in two modes. The default, single detector mode mimics the standard single detector system—the SLAVE detector becomes dead weight on the goniometer. Flood fields and fudicial plate images are collected in single detector mode. Alternately, the MASTER frame buffer may be placed in dual detector mode. Here, the MASTER may send the SLAVE specific instructions: begin collecting data, stop collecting, save image, etc., as well as control the GGCS; how- 5 - 84 M86-E01008
Related documents
J-3650-6 AutoMax Processor Module
S-PLUS 8 for Windows User's Guide
Bruker D8 Discover User Manual (Version: 2012.08.08)
M86-E01007 GADDS User manual.book
Bruker Microdiffractometer User Manual (Version: 2012.12.06)
CrysAlisPro - Agilent Technologies
Bruker D8
Forerunner® 101
Spotfire S+ User`s Guide for UNIX
BRUKER AXS PACK - X-ray Diffraction Texas A & M University
ABAQUS Front End (AFE) User Manual
Document - SoilPro